aerospace: add initial config

.config/aerospace/aerospace.toml

@@ -0,0 +1,229 @@
+# You can use it to add commands that run after AeroSpace startup.
+# Available commands : https://nikitabobko.github.io/AeroSpace/commands
+after-startup-command = []
+
+exec-on-workspace-change = [
+    '/bin/bash',
+    '-c',
+    '~/.config/aerospace/pip-move.sh',
+]
+
+# Start AeroSpace at login
+start-at-login = true
+
+# Normalizations. See: https://nikitabobko.github.io/AeroSpace/guide#normalization
+enable-normalization-flatten-containers = true
+enable-normalization-opposite-orientation-for-nested-containers = true
+
+# See: https://nikitabobko.github.io/AeroSpace/guide#layouts
+# The 'accordion-padding' specifies the size of accordion padding
+# You can set 0 to disable the padding feature
+accordion-padding = 30
+
+# Possible values: tiles|accordion
+default-root-container-layout = 'tiles'
+
+# Possible values: horizontal|vertical|auto
+# 'auto' means: wide monitor (anything wider than high) gets horizontal orientation,
+#               tall monitor (anything higher than wide) gets vertical orientation
+default-root-container-orientation = 'auto'
+
+# Mouse follows focus when focused monitor changes
+# Drop it from your config, if you don't like this behavior
+# See https://nikitabobko.github.io/AeroSpace/guide#on-focus-changed-callbacks
+# See https://nikitabobko.github.io/AeroSpace/commands#move-mouse
+# Fallback value (if you omit the key): on-focused-monitor-changed = []
+on-focused-monitor-changed = ['move-mouse monitor-lazy-center']
+
+# You can effectively turn off macOS "Hide application" (cmd-h) feature by toggling this flag
+# Useful if you don't use this macOS feature, but accidentally hit cmd-h or cmd-alt-h key
+# Also see: https://nikitabobko.github.io/AeroSpace/goodies#disable-hide-app
+automatically-unhide-macos-hidden-apps = true
+
+# Possible values: (qwerty|dvorak|colemak)
+# See https://nikitabobko.github.io/AeroSpace/guide#key-mapping
+[key-mapping]
+preset = 'qwerty'
+
+# Gaps between windows (inner-*) and between monitor edges (outer-*).
+# Possible values:
+# - Constant:     gaps.outer.top = 8
+# - Per monitor:  gaps.outer.top = [{ monitor.main = 16 }, { monitor."some-pattern" = 32 }, 24]
+#                 In this example, 24 is a default value when there is no match.
+#                 Monitor pattern is the same as for 'workspace-to-monitor-force-assignment'.
+#                 See:
+#                 https://nikitabobko.github.io/AeroSpace/guide#assign-workspaces-to-monitors
+[gaps]
+inner.horizontal = 5
+inner.vertical = 5
+outer.left = 5
+outer.bottom = 5
+outer.top = 5
+outer.right = 5
+
+# 'main' binding mode declaration
+# See: https://nikitabobko.github.io/AeroSpace/guide#binding-modes
+# 'main' binding mode must be always presented
+# Fallback value (if you omit the key): mode.main.binding = {}
+[mode.main.binding]
+
+# All possible keys:
+# - Letters.        a, b, c, ..., z
+# - Numbers.        0, 1, 2, ..., 9
+# - Keypad numbers. keypad0, keypad1, keypad2, ..., keypad9
+# - F-keys.         f1, f2, ..., f20
+# - Special keys.   minus, equal, period, comma, slash, backslash, quote, semicolon,
+#                   backtick, leftSquareBracket, rightSquareBracket, space, enter, esc,
+#                   backspace, tab, pageUp, pageDown, home, end, forwardDelete,
+#                   sectionSign (ISO keyboards only, european keyboards only)
+# - Keypad special. keypadClear, keypadDecimalMark, keypadDivide, keypadEnter, keypadEqual,
+#                   keypadMinus, keypadMultiply, keypadPlus
+# - Arrows.         left, down, up, right
+
+# All possible modifiers: cmd, alt, ctrl, shift
+
+# All possible commands: https://nikitabobko.github.io/AeroSpace/commands
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#exec-and-forget
+# You can uncomment the following lines to open up terminal with alt + enter shortcut
+# (like in i3)
+# alt-enter = '''exec-and-forget osascript -e '
+# tell application "Terminal"
+#     do script
+#     activate
+# end tell'
+# '''
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#layout
+alt-slash = 'layout tiles horizontal vertical'
+alt-comma = 'layout accordion horizontal vertical'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#focus
+alt-h = 'focus left'
+alt-j = 'focus down'
+alt-k = 'focus up'
+alt-l = 'focus right'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#move
+alt-shift-h = 'move left'
+alt-shift-j = 'move down'
+alt-shift-k = 'move up'
+alt-shift-l = 'move right'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#resize
+alt-minus = 'resize smart -50'
+alt-equal = 'resize smart +50'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#workspace
+alt-1 = 'workspace 1'
+alt-2 = 'workspace 2'
+alt-3 = 'workspace 3'
+alt-4 = 'workspace 4'
+alt-5 = 'workspace 5'
+alt-6 = 'workspace 6'
+alt-7 = 'workspace 7'
+alt-8 = 'workspace 8'
+alt-9 = 'workspace 9'
+alt-a = 'workspace A' # In your config, you can drop workspace bindings that you don't need
+alt-b = 'workspace B'
+alt-c = 'workspace C'
+alt-d = 'workspace D'
+alt-e = 'workspace E'
+alt-f = 'workspace F'
+alt-g = 'workspace G'
+alt-i = 'workspace I'
+alt-m = 'workspace M'
+alt-n = 'workspace N'
+alt-o = 'workspace O'
+alt-p = 'workspace P'
+alt-q = 'workspace Q'
+alt-r = 'workspace R'
+alt-s = 'workspace S'
+alt-t = 'workspace T'
+alt-u = 'workspace U'
+alt-v = 'workspace V'
+alt-w = 'workspace W'
+alt-x = 'workspace X'
+alt-y = 'workspace Y'
+alt-z = 'workspace Z'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#move-node-to-workspace
+alt-shift-1 = 'move-node-to-workspace 1'
+alt-shift-2 = 'move-node-to-workspace 2'
+alt-shift-3 = 'move-node-to-workspace 3'
+alt-shift-4 = 'move-node-to-workspace 4'
+alt-shift-5 = 'move-node-to-workspace 5'
+alt-shift-6 = 'move-node-to-workspace 6'
+alt-shift-7 = 'move-node-to-workspace 7'
+alt-shift-8 = 'move-node-to-workspace 8'
+alt-shift-9 = 'move-node-to-workspace 9'
+alt-shift-a = 'move-node-to-workspace A'
+alt-shift-b = 'move-node-to-workspace B'
+alt-shift-c = 'move-node-to-workspace C'
+alt-shift-d = 'move-node-to-workspace D'
+alt-shift-e = 'move-node-to-workspace E'
+alt-shift-f = 'move-node-to-workspace F'
+alt-shift-g = 'move-node-to-workspace G'
+alt-shift-i = 'move-node-to-workspace I'
+alt-shift-m = 'move-node-to-workspace M'
+alt-shift-n = 'move-node-to-workspace N'
+alt-shift-o = 'move-node-to-workspace O'
+alt-shift-p = 'move-node-to-workspace P'
+alt-shift-q = 'move-node-to-workspace Q'
+alt-shift-r = 'move-node-to-workspace R'
+alt-shift-s = 'move-node-to-workspace S'
+alt-shift-t = 'move-node-to-workspace T'
+alt-shift-u = 'move-node-to-workspace U'
+alt-shift-v = 'move-node-to-workspace V'
+alt-shift-w = 'move-node-to-workspace W'
+alt-shift-x = 'move-node-to-workspace X'
+alt-shift-y = 'move-node-to-workspace Y'
+alt-shift-z = 'move-node-to-workspace Z'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#workspace-back-and-forth
+alt-tab = 'workspace-back-and-forth'
+# See: https://nikitabobko.github.io/AeroSpace/commands#move-workspace-to-monitor
+alt-shift-tab = 'move-workspace-to-monitor --wrap-around next'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#mode
+alt-shift-semicolon = 'mode service'
+
+
+[workspace-to-monitor-force-assignment]
+1 = 'main'
+2 = 'main'
+3 = 'main'
+4 = 'main'
+5 = 'main'
+6 = ['secondary', 'main']
+7 = ['secondary', 'main']
+8 = ['secondary', 'main']
+9 = ['secondary', 'main']
+
+# 'service' binding mode declaration.
+# See: https://nikitabobko.github.io/AeroSpace/guide#binding-modes
+[mode.service.binding]
+esc = ['reload-config', 'mode main']
+r = ['flatten-workspace-tree', 'mode main'] # reset layout
+f = [
+    'layout floating tiling',
+    'mode main',
+] # Toggle between floating and tiling layout
+backspace = ['close-all-windows-but-current', 'mode main']
+
+# sticky is not yet supported https://github.com/nikitabobko/AeroSpace/issues/2
+#s = ['layout sticky tiling', 'mode main']
+
+alt-shift-h = ['join-with left', 'mode main']
+alt-shift-j = ['join-with down', 'mode main']
+alt-shift-k = ['join-with up', 'mode main']
+alt-shift-l = ['join-with right', 'mode main']
+
+down = 'volume down'
+up = 'volume up'
+shift-down = ['volume set 0', 'mode main']
+
+[[on-window-detected]]
+if.app-id = 'org.mozilla.firefox'
+if.window-title-regex-substring = 'Picture-in-Picture'
+run = 'layout floating'

.config/environment

@@ -6,7 +6,7 @@
 set -x EDITOR "nvim"
 set -x DIFFPROG "nvim -d"
 set -x TERMINAL "alacritty"
-set -x LANG de_DE.UTF-8
+set -x LANG en_US.UTF-8
 set -x XKB_DEFAULT_LAYOUT eu,de
 #set -x SUDO_ASKPASS "$HOME/.bin/sway/dmenupass"
 set -x PASSWORD_STORE_DIR "$HOME/.passwords"

.config/fish/config.fish

@@ -14,7 +14,7 @@ source "$XDG_CONFIG_HOME/aliases"
 
 # MacOS specific config
 if [ (uname) = "Darwin" ] && status is-interactive;
-  eval "$(/opt/homebrew/bin/brew shellenv)"
+	eval "$(/opt/homebrew/bin/brew shellenv)"
 end
 
 # If running from tty1 start sway

.config/git/config

@@ -29,3 +29,5 @@
 	required = true
 	clean = git-lfs clean -- %f
 	smudge = git-lfs smudge -- %f
+[init]
+	defaultBranch = main

.config/nvim/.gitignore

@@ -0,0 +1,8 @@
+tt.*
+.tests
+doc/tags
+debug
+.repro
+foo.*
+*.log
+data

.config/nvim/.neoconf.json

@@ -0,0 +1,15 @@
+{
+  "neodev": {
+    "library": {
+      "enabled": true,
+      "plugins": true
+    }
+  },
+  "neoconf": {
+    "plugins": {
+      "lua_ls": {
+        "enabled": true
+      }
+    }
+  }
+}

.config/nvim/LICENSE

@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

.config/nvim/README.md

@@ -0,0 +1,4 @@
+# 💤 LazyVim
+
+A starter template for [LazyVim](https://github.com/LazyVim/LazyVim).
+Refer to the [documentation](https://lazyvim.github.io/installation) to get started.

.config/nvim/init.lua

@@ -0,0 +1,2 @@
+-- bootstrap lazy.nvim, LazyVim and your plugins
+require("config.lazy")

.config/nvim/init.vim

@@ -1,53 +0,0 @@
-let mapleader = "\<space>"
-
-" General editor config
-language en_US
-set number
-set scrolloff=3
-set sidescroll=3
-set tabstop=4
-set shiftwidth=4
-set cursorline
-set nowrap
-set ignorecase
-set smartcase
-set smartindent
-set mouse=a
-set showmatch
-set undofile
-set shortmess=I "disable intro message
-set splitbelow
-set splitright
-
-" Key mapping
-nnoremap \\ :noh<cr> " Clear higlighting
-
-set listchars=tab:▸\ ,eol:↵,space:.
-nnoremap <leader>l :set list!<CR>
-
-" enable copy to clipboard
-map <Leader>y "+y
-map <Leader>p "*p
-
-" Align block of text and keep them selected
-vmap < <gv
-vmap > >gv
-
-
-
-" jk is escape
-inoremap jk <ESC>
-
-" Jump to the last position when reopening a file
-au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
-
-" Trim Whitespaces
-fun! TrimWhitespace()
-	let l:save = winsaveview()
-	keeppatterns %s/\s\+$//e
-	call winrestview(l:save)
-endfun
-command! TrimWhitespace call TrimWhitespace()
-
-" Load lua config
-lua require('config')

.config/nvim/lazy-lock.json

@@ -0,0 +1,43 @@
+{
+  "LazyVim": { "branch": "main", "commit": "25abbf546d564dc484cf903804661ba12de45507" },
+  "SchemaStore.nvim": { "branch": "main", "commit": "c957914d75b4a008ce09f4116e57e59fe6e3fae1" },
+  "blink.cmp": { "branch": "main", "commit": "586ee87534f5bf65f1c8dea2d1da2a57e8cddd36" },
+  "bufferline.nvim": { "branch": "main", "commit": "655133c3b4c3e5e05ec549b9f8cc2894ac6f51b3" },
+  "catppuccin": { "branch": "main", "commit": "fa42eb5e26819ef58884257d5ae95dd0552b9a66" },
+  "conform.nvim": { "branch": "master", "commit": "973f3cb73887d510321653044791d7937c7ec0fa" },
+  "flash.nvim": { "branch": "main", "commit": "3c942666f115e2811e959eabbdd361a025db8b63" },
+  "friendly-snippets": { "branch": "main", "commit": "572f5660cf05f8cd8834e096d7b4c921ba18e175" },
+  "fzf-lua": { "branch": "main", "commit": "e297fea843bd703b162894e880d2ba90b1fe9dae" },
+  "gitsigns.nvim": { "branch": "main", "commit": "0cb5a7753d3c4b8e9cfdc9d88d9110cb8d4b1544" },
+  "grug-far.nvim": { "branch": "main", "commit": "45981a9af7f4e666a3cdaedb1d21d2ab926727a2" },
+  "lazy.nvim": { "branch": "main", "commit": "6c3bda4aca61a13a9c63f1c1d1b16b9d3be90d7a" },
+  "lazydev.nvim": { "branch": "main", "commit": "2367a6c0a01eb9edb0464731cc0fb61ed9ab9d2c" },
+  "lualine.nvim": { "branch": "master", "commit": "a94fc68960665e54408fe37dcf573193c4ce82c9" },
+  "markdown-preview.nvim": { "branch": "master", "commit": "a923f5fc5ba36a3b17e289dc35dc17f66d0548ee" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "1a31f824b9cd5bc6f342fc29e9a53b60d74af245" },
+  "mason.nvim": { "branch": "main", "commit": "fc98833b6da5de5a9c5b1446ac541577059555be" },
+  "mini.ai": { "branch": "main", "commit": "6a8e0b151d39b293cfa483cdea785e448c2e0e11" },
+  "mini.icons": { "branch": "main", "commit": "94848dad1589a199f876539bd79befb0c5e3abf0" },
+  "mini.pairs": { "branch": "main", "commit": "42407ccb80ec59c84e7c91d815f42ed90a8cc093" },
+  "neo-tree.nvim": { "branch": "main", "commit": "05164ef3384c2825d645394aba6978b2f5665aa3" },
+  "noice.nvim": { "branch": "main", "commit": "0427460c2d7f673ad60eb02b35f5e9926cf67c59" },
+  "nui.nvim": { "branch": "main", "commit": "de740991c12411b663994b2860f1a4fd0937c130" },
+  "nvim-lint": { "branch": "master", "commit": "3c5e34c24834a67b1cb37600ab7663eefd2b0390" },
+  "nvim-lspconfig": { "branch": "master", "commit": "dbfd8da6206b4ab0e2fe9b72a538f82e2b410102" },
+  "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
+  "nvim-treesitter-textobjects": { "branch": "master", "commit": "89ebe73cd2836db80a22d9748999ace0241917a5" },
+  "nvim-ts-autotag": { "branch": "main", "commit": "a1d526af391f6aebb25a8795cbc05351ed3620b5" },
+  "onedark.nvim": { "branch": "master", "commit": "11de4da47f3e69cb70c3ae9816bd8af166cbe121" },
+  "persistence.nvim": { "branch": "main", "commit": "166a79a55bfa7a4db3e26fc031b4d92af71d0b51" },
+  "plenary.nvim": { "branch": "master", "commit": "857c5ac632080dba10aae49dba902ce3abf91b35" },
+  "render-markdown.nvim": { "branch": "main", "commit": "12d951dfe3c884063e874bdfc0b4c86e0843237c" },
+  "snacks.nvim": { "branch": "main", "commit": "bc0630e43be5699bb94dadc302c0d21615421d93" },
+  "todo-comments.nvim": { "branch": "main", "commit": "304a8d204ee787d2544d8bc23cd38d2f929e7cc5" },
+  "tokyonight.nvim": { "branch": "main", "commit": "057ef5d260c1931f1dffd0f052c685dcd14100a3" },
+  "trouble.nvim": { "branch": "main", "commit": "85bedb7eb7fa331a2ccbecb9202d8abba64d37b3" },
+  "ts-comments.nvim": { "branch": "main", "commit": "1bd9d0ba1d8b336c3db50692ffd0955fe1bb9f0c" },
+  "vim-dadbod": { "branch": "master", "commit": "e95afed23712f969f83b4857a24cf9d59114c2e6" },
+  "vim-dadbod-completion": { "branch": "master", "commit": "a8dac0b3cf6132c80dc9b18bef36d4cf7a9e1fe6" },
+  "vim-dadbod-ui": { "branch": "master", "commit": "2900a1617b3df1a48683d872eadbe1101146a49a" },
+  "which-key.nvim": { "branch": "main", "commit": "370ec46f710e058c9c1646273e6b225acf47cbed" }
+}

.config/nvim/lazyvim.json

@@ -0,0 +1,14 @@
+{
+  "extras": [
+    "lazyvim.plugins.extras.editor.fzf",
+    "lazyvim.plugins.extras.lang.json",
+    "lazyvim.plugins.extras.lang.markdown",
+    "lazyvim.plugins.extras.lang.sql",
+    "lazyvim.plugins.extras.lang.toml",
+    "lazyvim.plugins.extras.lang.typescript"
+  ],
+  "news": {
+    "NEWS.md": "10960"
+  },
+  "version": 8
+}

.config/nvim/lua/config.lua

@@ -1,19 +0,0 @@
--- lazy.nvim
-local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
-if not vim.loop.fs_stat(lazypath) then
-  vim.fn.system({
-    "git",
-    "clone",
-    "--filter=blob:none",
-    "https://github.com/folke/lazy.nvim.git",
-    "--branch=stable", -- latest stable release
-    lazypath,
-  })
-end
-vim.opt.rtp:prepend(lazypath)
-
--- Plugins
-require("lazy").setup({
-  --"lukas-reineke/indent-blankline.nvim", --Indent guides for Neovim
-})
-

.config/nvim/lua/config/autocmds.lua

@@ -0,0 +1,3 @@
+-- Autocmds are automatically loaded on the VeryLazy event
+-- Default autocmds that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/autocmds.lua
+-- Add any additional autocmds here

.config/nvim/lua/config/keymaps.lua

@@ -0,0 +1,3 @@
+-- Keymaps are automatically loaded on the VeryLazy event
+-- Default keymaps that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/keymaps.lua
+-- Add any additional keymaps here

.config/nvim/lua/config/lazy.lua

@@ -0,0 +1,53 @@
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not (vim.uv or vim.loop).fs_stat(lazypath) then
+  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
+  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
+  if vim.v.shell_error ~= 0 then
+    vim.api.nvim_echo({
+      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
+      { out, "WarningMsg" },
+      { "\nPress any key to exit..." },
+    }, true, {})
+    vim.fn.getchar()
+    os.exit(1)
+  end
+end
+vim.opt.rtp:prepend(lazypath)
+
+require("lazy").setup({
+  spec = {
+    -- add LazyVim and import its plugins
+    { "LazyVim/LazyVim", import = "lazyvim.plugins" },
+    -- import/override with your plugins
+    { import = "plugins" },
+  },
+  defaults = {
+    -- By default, only LazyVim plugins will be lazy-loaded. Your custom plugins will load during startup.
+    -- If you know what you're doing, you can set this to `true` to have all your custom plugins lazy-loaded by default.
+    lazy = false,
+    -- It's recommended to leave version=false for now, since a lot the plugin that support versioning,
+    -- have outdated releases, which may break your Neovim install.
+    version = false, -- always use the latest git commit
+    -- version = "*", -- try installing the latest stable version for plugins that support semver
+  },
+  install = { colorscheme = { "tokyonight", "habamax" } },
+  checker = {
+    enabled = true, -- check for plugin updates periodically
+    notify = false, -- notify on update
+  }, -- automatically check for plugin updates
+  performance = {
+    rtp = {
+      -- disable some rtp plugins
+      disabled_plugins = {
+        "gzip",
+        -- "matchit",
+        -- "matchparen",
+        -- "netrwPlugin",
+        "tarPlugin",
+        "tohtml",
+        "tutor",
+        "zipPlugin",
+      },
+    },
+  },
+})

.config/nvim/lua/config/options.lua

@@ -0,0 +1,5 @@
+-- Options are automatically loaded before lazy.nvim startup
+-- Default options that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/options.lua
+-- Add any additional options here
+
+vim.opt.clipboard = ""

.config/nvim/lua/plugins/colorscheme.lua

@@ -0,0 +1,11 @@
+return {
+  { "navarasu/onedark.nvim", opts = { style = "warmer", transparent = false } },
+
+  -- Configure LazyVim to load gruvbox
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "onedark",
+    },
+  },
+}

.config/nvim/lua/plugins/example.lua

@@ -0,0 +1,193 @@
+-- since this is just an example spec, don't actually load anything here and return an empty spec
+-- stylua: ignore
+if true then return {} end
+
+-- every spec file under the "plugins" directory will be loaded automatically by lazy.nvim
+--
+-- In your plugin files, you can:
+-- * add extra plugins
+-- * disable/enabled LazyVim plugins
+-- * override the configuration of LazyVim plugins
+return {
+  -- add gruvbox
+  { "ellisonleao/gruvbox.nvim" },
+
+  -- Configure LazyVim to load gruvbox
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "gruvbox",
+    },
+  },
+
+  -- change trouble config
+  {
+    "folke/trouble.nvim",
+    -- opts will be merged with the parent spec
+    opts = { use_diagnostic_signs = true },
+  },
+
+  -- disable trouble
+  { "folke/trouble.nvim", enabled = false },
+
+  -- override nvim-cmp and add cmp-emoji
+  {
+    "hrsh7th/nvim-cmp",
+    dependencies = { "hrsh7th/cmp-emoji" },
+    ---@param opts cmp.ConfigSchema
+    opts = function(_, opts)
+      table.insert(opts.sources, { name = "emoji" })
+    end,
+  },
+
+  -- change some telescope options and a keymap to browse plugin files
+  {
+    "nvim-telescope/telescope.nvim",
+    keys = {
+      -- add a keymap to browse plugin files
+      -- stylua: ignore
+      {
+        "<leader>fp",
+        function() require("telescope.builtin").find_files({ cwd = require("lazy.core.config").options.root }) end,
+        desc = "Find Plugin File",
+      },
+    },
+    -- change some options
+    opts = {
+      defaults = {
+        layout_strategy = "horizontal",
+        layout_config = { prompt_position = "top" },
+        sorting_strategy = "ascending",
+        winblend = 0,
+      },
+    },
+  },
+
+  -- add pyright to lspconfig
+  {
+    "neovim/nvim-lspconfig",
+    ---@class PluginLspOpts
+    opts = {
+      ---@type lspconfig.options
+      servers = {
+        -- pyright will be automatically installed with mason and loaded with lspconfig
+        pyright = {},
+      },
+    },
+  },
+
+  -- add tsserver and setup with typescript.nvim instead of lspconfig
+  {
+    "neovim/nvim-lspconfig",
+    dependencies = {
+      "jose-elias-alvarez/typescript.nvim",
+      init = function()
+        require("lazyvim.util").lsp.on_attach(function(_, buffer)
+          -- stylua: ignore
+          vim.keymap.set( "n", "<leader>co", "TypescriptOrganizeImports", { buffer = buffer, desc = "Organize Imports" })
+          vim.keymap.set("n", "<leader>cR", "TypescriptRenameFile", { desc = "Rename File", buffer = buffer })
+        end)
+      end,
+    },
+    ---@class PluginLspOpts
+    opts = {
+      ---@type lspconfig.options
+      servers = {
+        -- tsserver will be automatically installed with mason and loaded with lspconfig
+        tsserver = {},
+      },
+      -- you can do any additional lsp server setup here
+      -- return true if you don't want this server to be setup with lspconfig
+      ---@type table<string, fun(server:string, opts:_.lspconfig.options):boolean?>
+      setup = {
+        -- example to setup with typescript.nvim
+        tsserver = function(_, opts)
+          require("typescript").setup({ server = opts })
+          return true
+        end,
+        -- Specify * to use this function as a fallback for any server
+        -- ["*"] = function(server, opts) end,
+      },
+    },
+  },
+
+  -- for typescript, LazyVim also includes extra specs to properly setup lspconfig,
+  -- treesitter, mason and typescript.nvim. So instead of the above, you can use:
+  { import = "lazyvim.plugins.extras.lang.typescript" },
+
+  -- add more treesitter parsers
+  {
+    "nvim-treesitter/nvim-treesitter",
+    opts = {
+      ensure_installed = {
+        "bash",
+        "html",
+        "javascript",
+        "json",
+        "lua",
+        "markdown",
+        "markdown_inline",
+        "python",
+        "query",
+        "regex",
+        "tsx",
+        "typescript",
+        "vim",
+        "yaml",
+      },
+    },
+  },
+
+  -- since `vim.tbl_deep_extend`, can only merge tables and not lists, the code above
+  -- would overwrite `ensure_installed` with the new value.
+  -- If you'd rather extend the default config, use the code below instead:
+  {
+    "nvim-treesitter/nvim-treesitter",
+    opts = function(_, opts)
+      -- add tsx and treesitter
+      vim.list_extend(opts.ensure_installed, {
+        "tsx",
+        "typescript",
+      })
+    end,
+  },
+
+  -- the opts function can also be used to change the default opts:
+  {
+    "nvim-lualine/lualine.nvim",
+    event = "VeryLazy",
+    opts = function(_, opts)
+      table.insert(opts.sections.lualine_x, "😄")
+    end,
+  },
+
+  -- or you can return new options to override all the defaults
+  {
+    "nvim-lualine/lualine.nvim",
+    event = "VeryLazy",
+    opts = function()
+      return {
+        --[[add your custom lualine config here]]
+      }
+    end,
+  },
+
+  -- use mini.starter instead of alpha
+  { import = "lazyvim.plugins.extras.ui.mini-starter" },
+
+  -- add jsonls and schemastore packages, and setup treesitter for json, json5 and jsonc
+  { import = "lazyvim.plugins.extras.lang.json" },
+
+  -- add any tools you want to have installed below
+  {
+    "williamboman/mason.nvim",
+    opts = {
+      ensure_installed = {
+        "stylua",
+        "shellcheck",
+        "shfmt",
+        "flake8",
+      },
+    },
+  },
+}

.config/nvim/stylua.toml

@@ -0,0 +1,3 @@
+indent_type = "Spaces"
+indent_width = 2
+column_width = 120